20
5 ALARM
5.1 Alarm
If the red lamp at lights up, disinfection was aborted because
of low temperature or some other error. The display shows an error
code.
5.2 Acknowledgement of error message
Some error messages need to be acknowledged before the
machine can be returned to run mode. When the cause of the
error has been found and the error has been put right, the error
message is acknowledged as follows:
First press the button (1), then the button (2). Keep both buttons
pressed at the same time for 10 seconds.
The machine is now ready to operate. Re-run the aborted program
if the goods are still in the machine. If the error persists, call
service personnel.
Typhoon
1
2
Figure 7. Acknowledgement of error message
5.3 During a power failure
If the power fails during a process, the machine remains locked.
When the power returns, the machine restarts the process
automatically.
To Next Page
Loading...
