19
Measure Every year /
10,000 cycles
Every other
year /
20,000 cycles
Time*
(minutes)
8.1 Check and adjust the needle valve. • 10
9 Automatic door
9.1 Check the automatic door for proper
operation.
• 5
10 Function check (at each service)
10.1 Run a complete process and be sure there are no deviations according to the
periodic checkpoints.
10.2 Check that the panel’s lamps and alarms are functioning.
*The time required is estimated with the top o and may vary
depending on the installation settings, operating conditions and
equipment level.
4.4 Machines that are not in use
A machine that is not being used should be drained. Contact a
service technician.
To Next Page
Loading...
