Arkel KM-20 - Parameter Setting via KM-20 Keypad; General Parameter Settings

ARKEL Elektrik Elektronik Ltd. Şti. www.arkel.com.tr
ARKEL 49 KM-20
TÜRKÇE
ENGLISH
14. PARAMETER SETTING via KM-20 KEYPAD
14.1. GENERAL PARAMETER SETTINGS
LANGUAGE
Menu language
TURKCE
Turkish
ENGLISH
English
Ελληνικά
Greek
SPEED SETTINGS
The type of door speed settings. All speed parameters can easily be set
to default values or can be adjusted separately. The speed setting
parameters only appear when this parameter is set to “CUSTOM
SETINGS”. Otherwise these parameters will be set to default values
and will not appear in menu.
These speed setting parameters are:
- OPENING SPEED
- OPENING SLOW SPD
- OPEN RAMP LENGHT
- OPEN SLOW AREA
- CLOSING SPEED
- CLOSING SLOW SPD
- CLS.RAMP LENGHT
- CLOSE SLOW AREA
SLOW DEFAULTS
Speed setting parameters will be set to slow default values.
NORMAL DEFAULTS
Speed setting parameters will set to normal default values.
FAST DEFAULTS
Speed setting parameters will set to fast default values.
CUSTOM SETINGS
Each speed setting parameter can be adjusted separately.
OPEN HOLD
FORCE
The holding force constantly applied to motor after door fully opens to remain
door open (to overcome the closing force because of the door spring)
CLOSE HOLD
FORCE
The holding force constantly applied to motor after door fully closes to remain
door closed (to overcome the opening force because of the skate spring)