Advanced Customizations
ARM DUI 0482K Copyright © 2010-2012 ARM. All rights reserved. 11-9
ID120712 Non-Confidential
11.3 Using Stored Streamline Capture Data to create new Streamline Analysis
Reports
You might want to use stored capture data to create new Streamline Analysis reports for the
following reasons:
• You captured data locally and transferred the Streamline Capture Data to the host.
• Sources were not available when the data was captured.
• Current Streamline Analysis files have been rendered incompatible by a new version of
Streamline.
To create a new Streamline Analysis File:
1. Open the Streamline Data view.
2. Double-click on a stored Streamline Capture Data resource in the list.
3. In the resulting dialog box, make the required changes to the settings.
Figure 11-2 The Analyze dialog box
The options here are a subset of the options available in the Capture Options dialog box
and they work the same way. Use the checkboxes of the Analysis section to toggle the
High Resolution Timeline and Process Debug Information on and off. Use the Program
Images section to add and remove images.
4. Click Analyze.
5. Enter a name for the new Analysis File in the resulting dialog box.
11.3.1 See also
Tasks
• Capturing data on your target on page 11-2
• Customize reports using Annotate on page 10-2
• Creating custom performance counters on page 11-4.
Reference
• Capture options on page 4-3
• The Streamline Data view on page 3-2.
To Next Page
Loading...
