Need help?Do you have a question about the ARM MPS2 and is the answer not in the manual?
General| Architecture | ARM |
|---|---|
| Family | Cortex-M |
| Connectivity | Ethernet, USB, SPI, I2C, UART |
| Interfaces | JTAG, SWD, UART |
| Power Supply | 3.3V |
| Form Factor | Development Board |
| Debug | JTAG, SWD |
| Development Tools | ARM Keil MDK, IAR Embedded Workbench |
| Included Processors | Cortex-M3, Cortex-M4 |
Covers the book's purpose, intended audience, structure, typography, and diagrams.
Details how to provide feedback on the product and manual content.
Details safety measures and precautions to prevent damage to the board.
Provides an overview of the MPS2 and MPS2+ FPGA Prototyping Boards and their features.
Illustrates and describes the location of components on the upper and lower faces of the MPS2 board.
Illustrates and describes the location of components on the upper and lower faces of the MPS2+ board.
Details the overall hardware infrastructure and power-up/reset mechanisms.
Describes user expansion, USB, SPI, UART, VGA, CLCD, Audio, and Ethernet interfaces.
Covers external user memory, MCC FPGA serial interface, and debug/trace systems.
Outlines minimum design settings for correct board operation.
Explains the board configuration process during powerup and reset.
Covers remote USB operation, the configuration system, and files.
Details the powerup sequence and the function of reset push buttons.
Introduces the programmers model, base addresses, and memory map.
Summarizes SCC registers, system configuration registers, and their details.
Details debug connectors (JTAG, CoreSight, MICTOR) and user expansion connectors.
Describes CLCD, USB, UART, SPI, VGA, and Audio connectors for data and video I/O.
Details the Ethernet connector and the 12V DC power connector.
Provides information on current characteristics and FPGA power requirements.
Details the technical changes made between different issues of the document.
To Next Page
