ARM MPS2 - Chapter 5: Signal Descriptions and Connectors

Chapter 5
Signal Descriptions
This chapter describes the signals present at the interface connectors of the MPS2 and MPS2+ FPGA
Prototyping Boards.
It contains the following sections:
• 5.1 Debug connectors on page 5-75.
• 5.2 Expansion connectors on page 5-80.
• 5.3 CLCD connector on page 5-82.
• 5.4 USB 2.0 connector on page 5-83.
• 5.5 UART connector on page 5-84.
• 5.6 SPI connector on page 5-85.
• 5.7 VGA connector on page 5-86.
• 5.8 Audio connectors on page 5-87.
• 5.9 Ethernet connector on page 5-88.
• 5.10 12V power connector on page 5-89.
100112_0200_09_en
Copyright © 2013–2016, 2018–2020 Arm Limited or its affiliates. All
rights reserved.
5-74
Non-Confidential