Chapter 3
Configuration
This chapter describes the powerup and configuration process of the MPS2 and MPS2+ FPGA
Prototyping Boards.
It contains the following sections:
• 3.1 Overview of the configuration process on page 3-49.
• 3.2 Remote USB operation on page 3-51.
• 3.3 Configuration system on page 3-52.
• 3.4 Powerup and configuration process on page 3-53.
• 3.5 Reset push buttons on page 3-55.
• 3.6 Configuration files on page 3-56.
100112_0200_09_en
Copyright © 2013–2016, 2018–2020 Arm Limited or its affiliates. All
rights reserved.
3-48
Non-Confidential
To Next Page
Loading...
Need help?
General
