ARM MPS2 - Chapter 2: MPS2 and MPS2+ Hardware Description

Chapter 2
Hardware Description
This chapter describes the MPS2 and MPS2+ board hardware.
It contains the following sections:
• 2.1 Overview of the MPS2 and MPS2+ hardware on page 2-22.
• 2.2 Clocks on page 2-25.
• 2.3 Powerup, powerdown, and resets on page 2-27.
• 2.4 User expansion port on page 2-28.
• 2.5 USB 2.0 Full Speed interface on page 2-29.
• 2.6 SPI interface on page 2-30.
• 2.7 UART interface on page 2-31.
• 2.8 VGA and CLCD interfaces on page 2-32.
• 2.9 Audio interface on page 2-33.
• 2.10 Ethernet interface on page 2-34.
• 2.11 User switches and user LEDs on page 2-35.
• 2.12 External user memory on page 2-36.
• 2.13 MCC FPGA serial interface on page 2-39.
• 2.14 Power on page 2-42.
• 2.15 Debug and trace on page 2-43.
• 2.16 Minimum design settings for board operation on page 2-47.
100112_0200_09_en
Copyright © 2013–2016, 2018–2020 Arm Limited or its affiliates. All
rights reserved.
2-21
Non-Confidential