Setting Capture Options
ARM DUI 0482K Copyright © 2010-2012 ARM. All rights reserved. 4-2
ID120712 Non-Confidential
4.1 Opening the Capture Options dialog box
The Capture Options dialog box enables you to change capture session settings such as duration,
sample rate, and buffer size.
To open the Capture Options dialog box:
1. Make sure that you have the Streamline Data view open.
Figure 4-1 The Streamline data view
To open the Streamline Data view, select Window → Show View → Other..., and choose
it from the ARM Streamline folder.
2. Click Change capture options, located in the upper right of the Streamline Data view.
Figure 4-2 The Change capture options button
4.1.1 See also
Reference
• Capture options on page 4-3
• The Streamline Data view on page 3-2.
To Next Page
Loading...
