Configuring Counters
ARM DUI 0482K Copyright © 2010-2012 ARM. All rights reserved. 5-2
ID120712 Non-Confidential
5.1 Opening the Counter Configuration dialog box
ARM Streamline uses a default best-fit of hardware performance counters to aid in the analysis
of your applications, but you can modify them using the Counter Configuration dialog box,
accessed through the Streamline Data view.
To open the Capture Options dialog box:
1. Make sure that you have the Streamline Data view open.
Figure 5-1 The Streamline data view
To open the Streamline Data view, select Window → Show View → Other..., and choose
it from the ARM Streamline folder.
2. Click Counter Configuration, located in the upper right of the Streamline Data view.
Figure 5-2 The Counter Configuration button
To open the Counter Configuration dialog box, you must be able to the target so that
Streamline can determine which counters are available for your specific hardware.
Clicking Counter Configuration without properly specifying a target produces an error
message.
To Next Page
Loading...
