Using the Streamline Data View
ARM DUI 0482K Copyright © 2010-2012 ARM. All rights reserved. 3-3
ID120712 Non-Confidential
Figure 3-2 The compact data view
Start Capture
Starts a capture session. Streamline uses your settings from the Capture Options
dialog box. If you have not defined settings using the Capture Options dialog box,
Streamline connects to the target at the address that you entered in the Address
field using default values for each of the capture options. Once pressed, a dialog
box appears that prompts you to enter a title for the Capture.
Figure 3-3 Naming your Capture
Streamline adds the parent directory of the capture to the Analysis Data Locations
list if it is not already there. When the capture stops, Streamline generates an
analysis report based on the settings in the Capture Options dialog box.
To Next Page
Loading...
