Armstrong BRAIN DMC80 - Page 34

34
Armstrong International
Parc Industriel Des Hants-Sarts, 2ème Avenue No. 4, Haerstal, B-4040, Belgium
armstronginternational.com/brain
2
3
4
Switch Valve Control to OFF.
Click Set to transfer the values to the DRV80.
Click Refresh to force display and conrm the updated values.
Disinfection Cycle
Warning!
Due to the scalding temperature, the disinfection process must be supervised. The DRV80 should be
monitored whilst in disinfection mode and no one should be allowed to approach within 3 meters of
any affected outlets.
1
Click Arm when prepared for disinfection cycle, the Disinfection Status will conrm.
Within 20 seconds, click Trigger to activate the disinfection, the Disinfection Status will conrm.
(There is a 10 second countdown before full hot is supplied to the blend circuit. The display on the DRV80
changes to conrm the disinfection cycle is active.)
2
Temp 77˚C
Disinfection