ARRI ALEXA Mini Quick Guide

Switching on/off 19
6 Switching on/off
1
2
3
NOTICE
Before switching on, ensure that the camera is connected to an external power
source.
The power button background illumination is on when the power is in the valid
range.
To switch on the camera:
► Press the power button (1).
The camera starts booting. The boot status is indicated as follows:
Boot status LED (2) is... Camera
flashing blue is booting
solid blue has finished the boot process
For mounted MVF-1 only: During the boot process, the ARRI logo appears in the
monitor of the MVF-1 (4).
4
To switch off the camera:
► Press and hold the power button (1) until the camera has switched off and the boot
status LED (2) turns off.
For mounted MVF-1 only: On the monitor of the MVF-1, a countdown appears.
On reaching zero, the camera switches off.

ARRI ALEXA Mini Specifications

General

Sensor Type	ALEV III CMOS
Dynamic Range	14+ stops
Recording Formats	ARRIRAW, ProRes
Power Input	10.5-34 V DC
Base Sensitivity	EI 800
Lens Mount	PL mount
Weight	2.3 kg
ISO Range	160 to 3200
Frame Rates	0.75 - 200 fps (depending on recording format and sensor mode)
Dimensions	185 mm x 125 mm x 140 mm
Power Consumption	Approx. 50 W
Outputs	HD-SDI
Sensor Size	Super 35 format