8.10 Shoulder Pad SP-3
The camera base has an integrated arch to fit to the operator's
shoulder. For extended handheld shots, the shoulder pad SP-3 can be
attached to the base of the camera with velcro.
Note: The SP-3 can only be used with a BP-12 and 19 mm rods or with 15 mm
rods and a Wedge Adapter WA-1 and a Quick-Release Plate QR-HD-1 . When
using the BPA-1 with a BP-5/BP-8, the bridge plate has to be removed prior to
attaching the SP-3.
Figure 28: SP-3 shoulder pad
Figure 29: SP-3 below camera
To Next Page
Loading...
