Internet | Television | Telephone
13
Reset
Ethernet
10/100/1000
Cable
2
1
4
3
Using the Reset Button
Reset Button
Use the Reset button, on the back of the modem to reset the
modem and perform initialization as if you power cycled the unit. You
may need to reset the modem if you are having problems connecting
to the Internet. Using this button will be rare.
Use a pointed non-metallic object to press this button. The photo
to the left shows the location of the Reset button. The Reset button
is recessed to prevent accidental resets. The diagram on the left
shows the location of the reset button.
Resetting the Router to Factory Defaults
To reset the router to factory defaults, press and hold the Reset
button on the back of the modem for more than 15 seconds. This
restores the wireless setup configuration and router configuration
parameters to the factory defaults. You may need to do this if a
misconfiguration has locked out all access.
To Next Page
Loading...
