Closed Caption
Most viewers use these settings to toggle closed captioning on or off; however, you can select one of the following closed caption cards to set other
preferences:
• Display Preferences - choose a font type, window background and color, and other similar closed caption display settings.
• Language Preferences - set primary or secondary language display preferences.
• Digital Services - scroll through the additional digital stream service cards provided, and press OK to make a selection. Select one option at a time.
• Basic Services - scroll through the various basic service cards provided, and press OK to make a selection. Select one option at a time.
Secondary Audio
If you have an analog tuner, when you watch a TV program on an analog channel that includes a secondary audio program (SAP) in a different language, the
Moxi system application can pass that secondary audio stream to your TV or audio receiver.
1. To enable or disable secondary audio, go to the Settings category, and select the Secondary Audio card.
2. Choose enable (or disable), and then chose close.
3. Once you change to a channel carrying a secondary audio stream, you hear it immediately. If you tune to a channel that does not carry secondary audio,
then you hear the primary audio only.
Note: To hear alternate audio on digital channels, open the flip bar, press OK. If alternate languages are available, there will be a language option on the
action menu. Select language until you get the desired option.
91
To Next Page
Loading...
Need help?
General
