29
Step 16
SR29hw
1 Install the second ridge cap 6868
overlapping the first ridge cap while
installing two roof panels 7743.
Hint:
The bolts on the ridge cap need to be
left loose to move the ridge cap to the
side and overlap the ribs of the next
roof panel.
Continue weather strip-
ping the ridge.
NOTE
If roof beam holes do not line up
with the roof panel holes, shift the
building from left to right.
If this does not help, your building
may not be level. Shim the
corners until holes line up.
● Parts Needed For ●
Ridge Cap & Panels
●●
●●
● 7743 Roof Panel (2)
●●
●●
● 6868 Ridge Cap (1)
Weather Stripping Tape
6868
7743 Roof Panel
7743 Roof Panel
(16)
(4)
To Next Page
Loading...
