Artesis AMT Toolkit - Page 67

Appendices
65
Edit
Settings
Menu
Group
Submenu
items
Description
Type
Range
Default
Value
Local lockout
Requires that
passwords be
supplied prior to
entering all operating
modes In IMPROVE/
UPDATE/
MONITOR modes
only, the output relay
can be set to close on
the rising edge of a
transition above the
set fault level. The
relay can be reset by
selecting either
Acknowledge or
Reset relay.
Acknowledge will
cause the relay to
close only when the
current state is
exceeded while
Reset will allow the
relay to close at the
end of the current
iteration when if the
condition has not
been cleared
Edit/
Display
ON/OFF
OFF
Relay
threshold
Edit/
Display
OFF
WLoad?
Examine1
Examine2
OFF