Artesis AMT Toolkit - 2 Installation and Data Acquisition; Preliminary Checks; Safety Notes

AMU Installation
7
2. Installation and Data Acquisition
2.1. Preliminary checks
Please inspect the contents of the AMT Toolkit package and ensure that they agree with the
information in the packing list. In the event of any missing or damaged items, please
contact your supplier immediately. Artesis will not accept responsibility for damage caused
to or by any AMT Toolkit unit that has been incorrectly installed or installed on a motor
system outside the indicated power range.
AMT Toolkit accessories include the following:
CURRENT TRANSFORMERS
 Four sets of split-core current transformers. Class 1. Conforms to IEC185/BS7626 and BSEN60044-
1/ IEC 60044-1
 Current transformers are 100/5A, 200/5A, 300/5A and 400/5A.
 Frequency range 50 / 60 Hz
 System rated voltage 0.72/3kV
 Isolation voltage 3kV (1 minute)
 Continuous current 1.2xrated current
CABLES
 Voltage measurement cables (Fluke AC285 SureGrip™ Alligator Clips)
 Current measurement cables
 Power cable
 Cross cable for Ethernet connection
 Charging adapter for laptop
COMPUTER
 Amd Dual-Core Processor C60 1.3 GHz
 2 GB DDR3 RAM
 320GB Hard Disk
 11.6 inch LED LCD Display
 MS Windows 7 Starter Operating Software
2.2. Safety Notes