7.2. Shorten a pattern
To make a 64-step pattern shorter involves a slightly different procedure. Let’s say you want
the pattern to be 48 steps long instead:
• Hold the Last Step button until the example is complete.
• Press the << button to select Step Group 3. The “48” LED will light.
• Still holding the Last Step button, press Step button 16. It will turn blue, which
means the pattern is now 48 steps long.
• If you want the pattern to be even shorter, start over and press the << button until
the proper Step Group is selected.
To select a pattern length other than a multiple of 16, use the Last Step button and press the
appropriate Step button to define the final step in the pattern. This process is described in
the Pattern Length section [p.51].
63 Arturia - User Manual DrumBrute Impact - Advanced Features
To Next Page
Loading...
