Aruba 7030 - Technical Specifications and Compliance; Detailed 7030 Specifications; Safety and Regulatory Compliance Details

Aruba 7030 Mobility Controller | Installation Guide Specifications, Safety, and Compliance | 25
Chapter 3
Specifications, Safety, and
Compliance
7030 Specifications
Physical
 Device Dimensions (without mounting brackets) (HxWxD): 1.72” x 12.0” x 8.3” (4.37 cm x 30.48 cm x
21.08 cm)
 Device Weight: 4.54 lbs (2.06 kg)
Power Supply Specifications
 80W AC Power Supply
 AC Input Voltage: 100 VAC to 240 VAC
 AC Input Current: 2A
 AC Input Frequency: 50 to 60 Hz
Operating Specifications
 Operating Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
 Operating Humidity Range: 5% to 95% (RH), non-condensing
Storage Specifications
 Storage Temperature Range: 0 °C to 50 °C (32 °F to 122 °F)
 Storage Humidity Range: 5% to 95% (RH), non-condensing
Safety and Regulatory Compliance
Aruba Networks provides a multi-language document that contains country-specific restrictions and
additional safety and regulatory information for all Aruba products. This document can be viewed or
downloaded from the following location: www.arubanetworks.com/safety_addendum
Regulatory Model Name
The regulatory model name for the 7030 is ARCN7030.
The Aruba controllers must be installed by a professional installer. The professional installer is responsible for
ensuring that grounding is available and it meets applicable local and national electrical codes.
CLASS 1
LASER PRODUCT