What to do if the link light does not light when a cable is connected to my Aruba Switch?
If the link light on your Aruba Switch doesn't illuminate when a cable is connected, begin by inspecting for any loose or visibly damaged connections. If the connections seem fine, ensure they are securely fitted. If the issue persists, attempt using a different cable.
General| Model | Aruba Instant On 1430 |
|---|---|
| Category | Switch |
| Management | Unmanaged |
| Layer | Layer 2 |
| Jumbo Frame Support | Yes |
| Quality of Service (QoS) | Yes |
| Cloud Management | No |
| Ports | 24 |
| RJ-45 Ports | 24 |
| Mounting | Desktop |
| Power Consumption | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 15% to 95% |
| Power Supply | External |
| Forwarding Rate | 38.7 Mpps |
Contains copyright information and details about open source licenses used in the product.
Includes general notices, warranty statements, and acknowledgments of trademarks.
Lists the specific Aruba Instant On 1430 switch models and compatible power adapters.
Links to other relevant Aruba documentation for further information.
Details the physical components and ports of the switch models.
Describes the functional capabilities and technologies of the 1430 switch series.
Essential safety guidelines to follow before installing the switch.
Precautions to prevent personal injury or product damage during installation.
Steps and considerations for preparing the physical environment for switch installation.
Describes various methods for physically mounting the Aruba Instant On 1430 switches.
Lists all components included in the switch package.
Steps for site preparation and verifying the switch powers on.
Instructions for various methods of physically mounting the switch.
How to connect the switch to a power source and network devices.
Guide for installing and removing Small Form-factor Pluggable transceivers.
Introduction to troubleshooting the switch and its common issues.
Common problems and their resolutions for general switch operation.
Explains LED indicators and their meanings for diagnosing issues.
Provides detailed troubleshooting steps based on specific LED patterns or problems.
Specific LED indicators and troubleshooting steps related to Power over Ethernet (PoE) functionality.
Details operating conditions, dimensions, weights, and noise emissions.
Lists compliance standards, laser safety, and cabling requirements.
Guidelines for network cabling types, technologies, and supported distances.
Provides links to the main website, support portal, and forums.
Access to security bulletins and the end-user license agreement.
Information on how to contact support for assistance.
To Next Page
