Specifications | 33
Switch Model
Noise Emission
Aruba Instant On 1430 5G Switch (R8R44A) Power/Pressure: 0 dB (no fan)
Aruba Instant On 1430 8G Switch (R8R45A)
Power/Pressure: 0 dB (no fan)
Aruba Instant On 1430 8G Class4 PoE 64W Switch
(R8R46A)
Power/Pressure: 0 dB (no fan)
Aruba Instant On 1430 16G Switch (R8R47A) Power/Pressure: 0 dB (no fan)
Aruba Instant On 1430 16G Class4 PoE 124W Switch
(R8R48A)
Power/Pressure: 0 dB (no fan)
Aruba Instant On 1430 24G Switch (R8R49A) Power/Pressure: 0 dB (no fan)
Aruba Instant On 1430 26G 2SFP Switch (R8R50A)
Power/Pressure:0 dB (no fan)
Table 3: Noise Emissions per Switch Model
Standards
Laser Safety Information
Technology
Compatible with these
IEEE Standards
EN/IEC Standard
Compliance
SFP Lasers
10-T
100-TX
1000-T
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
1000-SX IEEE 802.3z 1000BASE-SX EN/IEC 60825 Class 1 Laser Product
Laser Klasse 1
1000-LX IEEE 802.3z 1000BASE-LX EN/IEC 60825 Class 1 Laser Product
Laser Klasse 1
Cabling and Technology Information Specifications
Cable Type OperationMode Description
Twisted-pair
copper
10 Mbps Operation Category 3, 4 or 5, 100-ohm unshielded twisted-pair (UTP) or
shielded twisted-pair (STP) cable, complying with IEEE 802.3
10BASE-T specifications.
100 Mbps
Operation
Category 5, 100-ohm UTP or STP cable, complying with IEEE
802.3u 100BASE-TX specifications.
1000 Mbps
Operation
Category 5, 100-ohm 4-pair UTP or STP cable, complying with IEEE
802.3ab 1000BASE-T specifications—Category 5e or better is
recommended. See note on 1000BASE-T Cable Requirements
below.
Table 4: Cable Information
To Next Page
Loading...
Need help?
General
