Arylic A50+ User Manual

8
8.2.2 Connection via LAN
Plug in the wired cable to the RJ45 Ethernet, the device will show on the app in about 10 seconds.
*Attention for Android users Different brand mobile phones may ask you to allow to use SoundSystem WiFi
network, please choose yes, if not, you may not able to set up successfully. It may also ask you to authorize other
things, please choose yes or it may a󰀨ect your use.
To use bluetooth, please swtich to bluetooth via app or by remote controller, then nd bluetooth device
SoundSystem_XXXX from your phone bluetooth setting and pair it.
8.2.3 Bluetooth

Arylic A50+ Specifications

General

Product Type	Stereo Amplifier
Amplifier Class	Class D
Wireless	Yes
Ethernet	10/100Mbps
Frequency Response	20Hz - 20kHz
Bluetooth Version	5.0
Bluetooth Profiles	A2DP, AVRCP
Supported Codecs	SBC, AAC
Optical Input	Yes
Subwoofer Output	Yes
Power Supply	24V/4.16A
Power Output	50W x 2
Connectivity	Wi-Fi, Bluetooth, Ethernet, USB, Optical, Coaxial
Audio Formats	MP3, WAV, FLAC, AAC, ALAC, OGG, WMA, APE
Control	Mobile App, Remote Control
Output Power	50W x 2 (4Ω)
Streaming Protocols	AirPlay, DLNA, Spotify Connect, UPnP
Audio Input	Optical, Coaxial, RCA, USB
Audio Output	Speaker Terminals, Subwoofer Output
USB	Yes
Power Input	24V/4.16A
Input Impedance	47k Ohms
Wi-Fi	802.11 b/g/n
Analog Input	Yes (RCA)