Arylic A50+ - USB Audio; 10 Up2 Stream Acpworkbench (Sell Separately)

18
9.3 USB Audio
Connect the device to your PC with USB cable (make sure it’s a data cable including the signal wires). The PC
will automatically discover a USB sound card, and when you activated it as the system main output, the PC will
send the audio output to the device in digital (44.1KHz/16bits). You can stream to other devices over multiroom
connection. NOTE: there’s about 3 seconds delay for multiroom slave devices.
Connect the Up2Stream device to your PC with USB cable (make sure it’s a data cable including the signal wires).
And open the program ACPWorkbench (only support Windows.), and you can tune audio effects conveniently,
including Music Noise Suppressor, Virtual Bass, Stereo Widener, Exciter, 10 bands EQ, Congure output channel
and PIN congs. After editing the audio effects, you can save the changes to the device so the tuned effects will
remain. You can get more.
information from our website www.arylic.com or from the Up2 Stream DSP Tool manual.
10. Up2Stream ACPWorkbench (Sell Separately)