Arylic S10 User Manual

8
8.2.2 Connection via LAN
Plug in the wired cable to the RJ45 Ethernet, the device will show on the app in about 10 seconds.
(Note: the mobile phone and the device must be in the same network)
*Attention for Android users
Different brand mobile phones may ask you to allow to use SoundSystem WiFi network, please
choose yes, if not, you may not able to set up successfully. It may also ask you to authorize other
things, please choose yes or it may affect your use.
8.2.3 Bluetooth
To use bluetooth ,please swtich to bluetooth via app or by remote controller,then find bluetooth
device SoundSystem_XXXX from your phone bluetooth setting and pair it .

Arylic S10 Specifications

General

Bluetooth Codec	SBC, AAC
Bluetooth Range	Up to 10 meters
Connectivity	Wi-Fi, Bluetooth, USB
Streaming Protocols	AirPlay, DLNA, Spotify Connect
Power Input	5V/1A
Frequency Response	20Hz - 20kHz
Input Impedance	10kΩ
Signal-to-Noise Ratio	91dB