Arylic S10 - 9.3 USB Audio; DSP Audio Effects Tool

17
9.3 USB Audio
Connect the device to your PC with USB cable (make sure it’s a data cable including the signal
wires). The PC will automatically discover a USB sound card, and when you activated it as the
system main output, the PC will send the audio output to the device in digital (44.1KHz/16bits). You
can stream to other devices over multiroom connection. NOTE: there’s about 3 seconds delay for
multiroom slave devices.
Connect the device to your PC with USB cable (make sure it’s a data cable including the signal
wires). And open the program DSP Audio Effects Tool (only support Windows.), and you can
tune audio effects conveniently, including Music Noise Suppressor, Virtual Bass, Stereo Widener,
Exciter, 10 bands EQ, etc. After editing the audio effects, you can save the changes to the device
so the tuned effects will remain. You can get more information from our website www.arylic.com.
10. DSP Audio Effects Tool (Sell Separately)