Series 300
2000 - 4000 Amp Pad Mount
Quick Connect Input and Output Power Panels
Florham Park, NJ 07932-1591 www.ascopower.com
DANGER is used in this manual to warn of a hazard
situation which, if not avoided, will result in death or
serious injury.
WARNING is used in this manual to warn of a
hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION is used in this manual to warn of a
hazardous situation which, if not avoided, could
result in minor or moderate injury.
Important:
This manual contains information critical to the proper
installation
and operation of the ASCO Series 300
Quick Connect Power Panels.
Be certain to read and
understand all instructions prior to installation
and
operation.
The ASCO Series 300 Quick Connect Power Panel
must be installed in
conjunction with a transfer switch.
ASCO Series 300 Quick Connect Input Power panels
are listed to UL1008. ASCO Series 300 Quick
Connect Output Panels are listed to UL 891 for
Switchboards.
Limited Warranty
When this ASCO Series 300 Quick Connect Power Panel
is installed and operated
according to the manual’s
instructions ASCO Power Technologies will repair or
replace any of its mechanical or electrical parts if they are
found
to
be defective in material or workmanship within two
year of the
purchase date.
Maintenance
The ASCO Series 300 Quick Connect Power Panels will
require periodic
maintenance. ASCO Power Technologies
recommends annual inspections to keep
the panel in safe
operating condition. ASCO Power Technologies
recommends that
the Pre-Operation and Maintenance
Checklist under Appendix A
serve as a basis for annual
inspection.
Technical Support
ASCO Power Services are available to assist in resolving
issues by calling 1-800-800 2726 (ASCO) or emailing
powerwarranty@ascopower.com. For any other
information, please refer to ascopower.com
381333-476
To Next Page
Need help?
General
