MS-P300-12.1-16
CONTENTS
Electrical connection ....................................................................................................................................17
Pneumatic connection ..................................................................................................................................28
Digital setpoint ..............................................................................................................................................18
Memory function (HOLD) .............................................................................................................................19
Reset function (ENABLE) .............................................................................................................................20
Zero point adjustment ...................................................................................................................................21
Span adjustment ...........................................................................................................................................21
Proportional gain ..........................................................................................................................................22
Option: Pressure switch ................................................................................................................................22
Option: External feedback value input ..........................................................................................................23
Dimensions and weights ...................................................................................................................... 24 - 27
Ordering information .....................................................................................................................................27
Position of potentiometers ............................................................................................................................28
CAUTION! Dangerous operating conditions may occur when using the programming interface on the valve as the valve may possibly
not react to the analog setpoint any more.
Provide for protection against uncontrolled movement of equipment when putting the valve into operation and before making any
modifications to the valve settings.
NOTICE
The information in this manual is subject to change without notice.
In no event shall ASCO NUMATICS be liable for technical or editorial errors or omissions. Neither is any liability assumed for accidental
or consequential damages arising out of or in connection with the supply or use of the information contained herein.
THIS MANUAL CONTAINS INFORMATION PROTECTED BY COPYRIGHT. NO PART OF THIS DOCUMENT MAY BE PHOTOCOPIED
OR REPRODUCED IN ANY FORM OR MANNER WHATSOEVER WITHOUT PRIOR WRITTEN PERMISSION FROM ASCO NUMATICS.
COPYRIGHT © 2016 - ASCO NUMATICS - All rights reserved.
This product complies with the essential requirements of the EMC Directive 2014/30/EU and its amendments. It is CE-approved.
A separate Declaration of Conformity is available on request.
Please provide ordering code and serial numbers of products concerned.
We herewith declare that the version of the product described in this installation manual is intended to be incorporated into or assembled with other
machinery and that it must not be put into service until the machinery into which it is to be incorporated has been declared in conformity with the
provisions of Council Directive 2006/42/EC.
Handling, assembly and putting into service and all settings and adjustments must be done by qualified, authorised personnel only.
This product contains electronic components sensitive to electrostatic
discharge. An electrostatic discharge generated by a person or object
coming in contact with the electrical components can damage or destroy
the product.
To avoid the risk of electrostatic discharge, please observe the handling
precautions and recommendations contained in standard EN 100015-1.
Do not connect or disconnect the device while it is energised.
CAUTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC SENSITIVE
DEVICES
To Next Page
Loading...
Need help?
General
