TD 93120EN
10 Oct 2016 / Ver. A
Configuration Manual
Ascom d43 DECT Handset
22
5. Handset Configuration
5.12 Own Line Settings
Use own line settings if the same phonebook is to be used in different systems and in
different countries.
The own line settings enables:
• Calling numbers stored with a “+” sign for the international access code. The same local
phonebook can be used in different countries.
• The recognition of incoming internal or external calls as numbers stored in international
format in the local phonebook. The same phonebook can be used in different systems.
For this feature to work, numbers must be stored in the local phonebook in international
format with a “+” sign for the international access code. Also, the Own Line parameters
must be configured via the WinPDM/Device Manager.
5.13 Uploadable Language
The handset can be loaded with one additional language. The language file is generated via
an Excel file. Excel language files are available from the handset supplier.
Note: If another language file is uploaded, the first additional language is overwritten.
Certain special characters are allowed when generating the language file, see information in
the Excel file.
To upload an additional language, the WinPDM or Device Manager is used, go to the devices
tab and select devices. In the Device menu, select “Upload language...”.
The parameter “Writing language” can be set to match the uploaded language. The
parameter controls:
• The characters available for text input
• The sort order in the phonebook
This parameter is only used when an uploaded language is set. The Parameter can be found
in the “Settings” folder.
Tip: A language can be uploaded on several handsets of the same device type
simultaneously using the Baseline function in the Device Manager.
5.14 Action when Handset is Placed In Charger
5.14.1 Redirect Calls and Messages while Charging
Calls can be redirected to another extension when the handset is placed in a charger. In
addition, message absence is also enabled when calls are redirected. When an application/
system sends a message to a handset, it receives an indication that the handset is absent.
The application or system determines if the message is sent to the handset or not, or is
redirected to another handset.
The function is automatically cancelled when the handset is removed from the charger.
1 Select Connections > In charger.
2 In the In charger action drop-down list, select “Redirect”.
NOTE: The settings in the system determines how the incoming calls and messages are
handled. This is a system dependent feature.
To Next Page
Loading...
Need help?
General
