EasyManuals Logo

ASCOM D42 User Manual

ASCOM D42
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
TD 93120EN
10 Oct 2016 / Ver. A
Configuration Manual
Ascom d43 DECT Handset
11
4. Maintenance
4.4 Replacement Procedure Choice Guide
Depending on situation, two different replacement procedures can be chosen; replacement
via WinPDM/Device Manager and Easy Replacement. Use the following list as a guide to
choose which procedure to use.
If a handset needs to be replaced due to for example a broken display, refer to the
handset user manual.
If the electrical connection is damaged, the Easy Replacement procedure may not work.
Depending on fault, it might work to do a replacement via WinPDM/Device Manager, see
4.5 Replacement of Handset with Device Manager on page 11 or 4.6 Handset
Replacement with WinPDM on page 12.
If two handsets and their settings are to be switched between two users, follow 4.5
Replacement of Handset with Device Manager on page 11 or 4.6 Handset Replacement
with WinPDM on page 12.
4.5 Replacement of Handset with Device Manager
Both the old handset and the new handset must be of the same device type. The same
extension number is assigned to the new handset.
Make sure that the old handset is saved in the Device Manager. Start the Device Manager
and navigate to the "Numbers" tab. There is a tick in the "Saved" column for the old
handset.
If the handset is not saved, insert it into a desktop charger or rack charger connected to
Device Manager and perform a save.
If the old handset settings cannot be saved, stop this replacement procedure. Instead
unsubscribe the old handset from the PBX, register the new handset and follow the
instructions for installing a handset, see 3.2 Installing a New Handset on page 7.
When the handset is saved, unsubscribe the old handset from the PBX.
The following steps are described in two different scenarios, check which one suits the best
before proceeding.
4.5.1 Data Included in a Replacement Transfer
The following data is replaced during a replacement with Device Manager:
User parameters (including User ID)
Contacts (entered by the user)
Note that the following data is not replaced:
•DECT registration
Call list
Company phonebook
Downloaded Language

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASCOM D42 and is the answer not in the manual?

ASCOM D42 Specifications

General IconGeneral
BrandASCOM
ModelD42
CategoryHandsets
LanguageEnglish

Related product manuals