Spraying Techniques
16 311139B
Getting Started With Basic
Techniques
• Hold gun 12 in. (30 cm) from surface and aim
straight at surface. Tilting gun to direct spray angle
causes an uneven finish.
• Flex wrist to keep gun pointed straight. Fanning gun
to direct spray at angle causes uneven finish.
Triggering Gun
Pull trigger after starting stroke. Release trigger before
end of stroke. Gun must be moving when trigger is
pulled and released.
Aiming Gun
Aim tip of gun at bottom edge of previous stroke, over-
lapping each stroke by half.
Practice spraying on a piece of scrap or cardboard
before you begin spraying.
HYHQ
ILQLVK
LQ
FP
WKLFN
XQHYHQ
ILQLVK
WKLQ
WLD
WLD
Correct
Incorrect
WLD
To Next Page
Loading...
