46 47
English
ASRock G10 Gaming Router
5. Tap "LEARN".
e LED indicator on the front of the
router will be ashing light blue.
6. Now point your remote controller
directly to the front panel of your G10
router (within 10 cm) and press the
button on your remote controller. If
the signal is successfully learned, the
front LED indicator will turn into
solid light blue.
7. You can tap "TEST" to check if the
command is copied.
8. Tap "SAVE" to save the setting.
Tap "CLEAR" to clear the learned
command.
9. Now you can use your mobile device
to remotely manipulate your router to
control your home appliances.
OR
Learning
(About 15 secs)
Done
(About 5 secs)
Failed
(Flashes twice)
Tap “LEARN”
To Next Page
Loading...
Need help?
General