Raising the Standards
An ASSA ABLOY Group company
25
What should the cutout be?
Cut frame according to the dimensions in the drawing.
a
Chisel out the recess dimensions within the frame.
b
a
b
504 faceplate option
For wood applications pre-drill pilot hole for mounting points
with a #30 drill bit.
c
[mm]
Inches
[34.9]
1 3/8”
26
Installer Hint
To obtain the best results when preparing a wood frame for an electric strike
installation; cut a 1/4" area around the inside of the template dimensions first
with a wood chisel or router for a clean finished edge.
What are the faceplate dimensions?
504 faceplate option
[mm]
Inches
To Previous Page
Loading...
