V4.4 03/08/18 TD0036 Page 10 of 39
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”
5.2 WHAT YOU SHOULD HAVE
Once you receive your Traka Touch system, please open the box and check you have the following…
If you are missing any of the above please contact Traka immediately.
In addition to the above, if you are adding an extension cabinet to an existing system you should also have the
following items:
• CAN Interface PCB
• Door Lock Extension Cable
• Ribbon Cable(s) (Cabinet to Cabinet connection)
NOTE: Traka do not provide wall fixings for your system. Please ensure you source appropriate fixings for
the type of wall you are fixing to.
c) x2 Master Keys
b) Traka Touch S Extension(s) (if applicable)
d) x1 Ferrite Core (Only required if
connecting to a network)
To Next Page
Loading...
