V4.4 03/08/18 TD0036 Page 2 of 39
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”
VERSION HISTORY
Version Date Who Description of Changes Approved By
1.0 01/10/12 AK Initial version of document.
1.1 02/10/12 AK Added notes on removing the strip frame.
2.0 09/01/13 AK Various Topics changed.
3.0 26/01/15 AK
Updated to reflect the pod changes, new system dimensions
and new iMX28 PCB.
3.1 27/04/15 AK
Added section on extension systems. Changed general
document layout.
3.2 22/10/15 LN
Updates to reflect system design changes. Updated Battery
Connection Details section. Rewritten to match current
3.3 23/06/16 LN
Added detail on tamper switch and door lock connections for
extension systems – sections 4, 6.1 and 6.6.
3.4 12/07/16 LN
Updated ‘What You Should Have’ and ‘Connecting Extension
Cabinets’ sections to include more detail for extension systems.
3.5 21/07/16 RC Document changed from UD0049 to TD0036
3.6 07/09/16 LN
Added to notes on ‘Extension Systems Overview’ and
‘Connecting Extension Cabinets’ sections to include more detail
on tamper switch connection/Interface PCB versions.
MT
3.7 21/11/16 RC Added UL Certification information to the introduction
3.8 12/04/17 LN
Added ‘Product Details’ section with compliance and electrical
details. Added ‘Mounting Info & Safety Tips’ section. Added
‘Product Disconnection’ section. Updated the ‘Connecting the
Mains Power’ section. Added ‘Replacing the Fuse in a Surge
Protection Device’ section. Added ‘Switching off the System’
MW
3.9 19/04/17 LN Edited a note in ‘Connecting the Mains Power’ section.
4.0 05/06/17 LN
Moved mains and network cable routing details into a new
section ‘Routing the Mains and Network Cables’ and added
detail for cable management.
Added ferrite core installation process
4.2 07/12/17 RC Update information from UL testing
Knock out dimensions added
To Next Page
Loading...
Need help?
General
