Asus P5SD2-VM User Manual

ASUS P5SD2-VM 2-17
PIO Mode [Auto]
Selects the PIO mode.
Conguration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Conguration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Conguration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Conguration options: [Disabled] [Enabled]
2.3.5 IDE Conguration
The items in this menu allow you to set or change the congurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
congure the item.
IDE Conguration
Onboard PCI IDE Controller [Enabled]
SATA Mode Selection [IDE]
Onboard PCI IDE Controller [Enabled]
Allows you to disable or enable the onboard PCI IDE controller.
Conguration options: [Disabled] [Enabled]
SATA Mode Selection [IDE]
Allows you to disable or set the onchip Serial ATA controller mode.
Conguration options: [Disabled] [IDE] [Raid] [AHCI]
DISABLED: disables
the integrated IDE
Controller.
ENABLED: enables
only the Primary IDE
Controller.

Asus P5SD2-VM Specifications

General

Form Factor	Micro ATX
Socket	LGA 775
Front Side Bus	1066/800/533 MHz
Memory Type	DDR2
Memory Slots	2 x DIMM
Maximum Memory	2 GB
LAN	Realtek RTL8201CL 10/100 Mbps Ethernet
USB Ports	8 x USB 2.0
Supported CPU	Intel Pentium 4
Expansion Slots	1 x PCIe x16
Audio	6-channel HD Audio
Integrated Graphics	SiS Mirage 1