Asus ROG Strix G13CH - LED CR BD Assembly; Acetate Fabric Application

17
LED CR BD for 2D (Metal side door) only
Assembly Notice
Before assemble cable on LED CR BD, please follow below steps to paste PINHEADER ACETATE FABRIC.
Step1-1 : PIN HEADER cannot exceed ACETATE FABRIC.
Step1-2 : Align the FPC CONNECTOR and the white wire with the ACETATE FABRIC.
Step2 : Take another ACETATE FABRIC and align it with the first ACETATE
FABRIC and paste tightly to adhere.
QTY Spec
2 G35CA PINHEADER ACETATE FABRIC