4-24
Chapter 4: BIOS setup
Parallel Port Configuration
Thesub-itemsinthismenuallowyoutosettheparallelportconguration.
Parallel Port [Enabled]
Allowsyoutoenableordisabletheparallelport(LPT/LPTE).Congurationoptions:
[Enabled][Disabled]
Change Settings [Auto]
Allows you to select the optimal setting for the super IO device.
Congurationoptions:[Auto][IO=378h;IRQ=5][IO=378h:IRQ=5,6,7,10,11,12]
[IO=278h;IRQ=5,6,7,10,11,12][IO=3BCh;IRQ=5,6,7,10,11,12]
Device Mode [STD Printer Mode]
Allowsyoutoselecttheprinterportmode.Congurationoptions:[STDPrintermode]
[SPPMode][EPP-1.9andSPPMode][EPP-1.7andSPPMode]
[ECPMode][ECPandEPP1.9Mode][ECPandEPP1.7Mode]
4.4.11 Intel
Server Platform Services
ThisitemdisplaystheinformationoftheIntelServerPlatformServicesconguredinthe
system.
Aptio Setup Utility - Copyright (C) 2014 American Megatrends, Inc.
Advanced
Intel Sever Platform Services Conguration
ME BIOS Interface Ver : 1.0
SPS Version 3.0.4.162
ME FW Status Value : 0xf0345
ME FW State : SPS ME FW Active
ME FW Operation State : M0 without UMA
ME FW Error Code : No Error
ME NM FW Status Value : 0x80000001
BIOS Booting Mode : Power Optimized Mode
Cores Disabled : 0
ME FW SKU Information : Node Manager
End-of-POST Status : EOP disabled in POST