Electrical connection
Information about the electrical connection can be found on the serial number plate. This specification
must match the electricity supply.
The dishwasher must be connected to an earthed socket.
The electric wall socket must be placed outside of the installation area to be easily accessible after
installing the dishwasher. Do not use an extension cord!
NOTE!
Any repair and maintenance pertaining to safety or performance should be done by trained
experts.
Screwing the dishwasher into place
(Applicable only to built-in dishwashers.)
After fastening the machine, check that the front feet still touch the floor.
Screw the dishwasher into place with two extra screws
If there is an air gap of more than 3 mm between the underside of the worktop and the top edge of
the dishwasher, the dishwasher ought to be screwed into place with two extra screws.
42
Installation
To Next Page
Loading...
