Bridging
To answer a bridged
1
Press
xxxxx
of bridged call
call
Note:
If your voice terminal has Ringing Appearance
Preference, this step is not necessary; you will
automatically be connected to the call when you lift the
handset.
2
Pick up handset
To prevent other
bridged voice terminals
from entering a call (on
1
Press
Exclusion xxxxx
while connected to the call
Note:
Pressing
Exclusion xxxxx
again reactivates bridging.
a per-call basis)
Call Coverage
To answer a call for a
1
Press
xxxxx
of incoming call when ring begins or green
co-worker for whom
light flashes
you are a coverage
Note:
The call is
not
at your voice terminal until the
point
light is flashing.
To leave a message
1
Press
Coverage Callback
while connected to the call
telling a co-worker to [confirmation tone]
call the original caller’s
Note:
To leave a message telling a co-worker to call
extension
you,
activate Leave Word Calling instead.
To talk privately with a
1
Press
Transfer
or
Conference-Ring
co-worker after
●
Call is temporarily put on hold
answering a redirected
call
2
Press
Consult
[priority ring to co-worker]
or dial co-worker’s extension
[single-burst ring to co-worker]
[dial tone]
14
To Next Page
Loading...
