AT&T 7406 Plus - Last Number Dialed; Leave Word Calling (LWC)

Last Number Dialed
To automatically redial
1
Press  Last Dialed  (while off-hook)
the last number you
or dial Last Number Dialed code (while off-hook)
dialed (extension,
outside number, or
●
Number is automatically dialed (up to 20 digits)
trunk/feature code)
Note: Available with DEFINITY Generic 2 and System
85 R2V4 and some R2V3 systems. Check with your
System Manager to learn if the feature is available on
your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviated Dialing, feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are NOT retained in
memory and must be redialed for each call.
To see the number you
1
Press  Last Dialed  (while on-hook)
last dialed (you must
●
have a voice terminal
Last number dialed is shown
with a display and you
must be on-hook)
Leave Word Calling (LWC)
To leave a message
1
Press  LWC  any time after you complete dialing
after dialing an
[confirmation tone]
extension (when call is
●
Message light on called voice terminal goes on (if so
not answered, or you
hear a coverage or
equipped)
busy tone)
Note: If reorder tone is heard, message is not stored;
Note: You must have a
try again.
 LWC  button.
To leave a message
1
without ringing an
extension
2
3
Press  LWC 
or dial Leave Word Calling code
[dial tone]
Dial extension
[confirmation tone]
●
Message light on called voice terminal goes on (if so
equipped)
Hang up or press  Drop 
20