Self-Test
✔
To test lights, ringer,
1
Press
-Select
(while on-hook or off-hook)
and display of your
●
Green light goes on
voice terminal
2
Press and hold
Drop-Test
●
Ringer sounds
●
All lights go on
●
Display is activated
3
Release
Drop-Test
to end test
●
Ringer and lights return to pretest state. Green light
next to -Select goes off.
Note:
If ringer or lights do
not
respond during test,
notify your System Manager.
Send All Calls
To send all incoming
1
Press
Send All Calls
(while on-hook or off-hook)
calls (except priority,
or lift handset and dial Send All Calls code
intercom, and personal
[confirmation tone]
central office calls)
Note:
You may hear a half ring as each call is sent to
immediately to an
coverage if you have a DEFINITY Generic 2 or System
assigned extension,
AUDIX, or message
85 R2V4.
center for coverage
To send an assigned
1
Press
SAC Group
(while on-hook or off-hook)
group of extensions
[confirmation tone]
(except priority,
intercom, and personal
central office calls)
immediately to an
assigned extension,
AUDIX, or message
center for coverage
26
To Next Page
Loading...
