Telephone settings
16
Set date/time
If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set
so that the day of the week can be calculated from the caller ID
information. You can turn off the date and time settings of the
caller ID service and set the date and time manually (see Use
caller ID to automatically set date and time on page 21).
After a power failure or handset registration, the system reminds
you to set the date and time.
To set the date and time manuall: .
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Press T
CID or SDIR to scroll to Set date/time
and then press MENU/SELECT.
3. Press TCID or SDIR to select the month, then
press MENU/SELECT, or enter the number using
the dialing keys.
4. Press T
CID or SDIR to select the day, then press
MENU/SELECT, or enter the number using the
dialing keys.
5. Press TCID or SDIR to select the year, then
press MENU/SELECT, or enter the number using
the dialing keys, then press
MENU/SELECT to
move on to set the time.
6. Press TCID or SDIR to select the hour, then
press MENU/SELECT, or enter the number using
the dialing keys.
7. Press T
CID or SDIR to select the minute, then press
MENU/SELECT, or enter the number using the dialing keys.
8. Press TCID or SDIR to highlight AM or PM, or press 2 for AM
or 7 for PM. Then, press MENU/SELECT to confirm. There is a
confirmation tone and the screen returns to the previous menu.
NOTE: If the clock is not set when a message is recorded, the system
announces, “Time and day not set,” before it plays the message.
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Ringers
>Set date/time
Handset settings
To Next Page
Loading...
Need help?
General
