Multiple handset use
38
Push-to-talk (PTT)
PTT call to multiple handsets
When there are multiple handsets and/or cordless headset(s)/
speakerphone(s) registered to the phone system, PTT supports
one-to-group calls. PTT supports a maximum of one-to-four calls
when one to five handsets are registered, and a maximum of
one-to-three calls when six or more handsets are registered. The
first four registered handsets will be able to use this feature. Other
handsets can only use PTT for one-to-one calls.
To call multiple handsets:
1. You have three ways to call multiple handsets. When the handset
is not in use:
Press and hold PUSH TO TALK until the handset shows
Connecting to group...
Press PUSH TO TALK. Press qq
CID or pDIR to choose Group.
Press MENU/SELECT or press PUSH TO TALK and your
handset shows Connecting to group...
Press PUSH TO TALK. Press TONE
followed by # (pound
key). The handset shows Connecting to group...
When the connection is made, both the caller and the
destination parties hear a beep. The speakerphones on all
other handsets automatically activate.
2. You need to press and hold PUSH TO TALK when you want to
speak. Speak towards the handset. Your voice is broadcast to
all handsets.
3. Release PUSH TO TALK after speaking.
4. Any extension can reply (see Answer a PTT call on page 39).
NOTE: After PUSH TO TALK on the handset is released, the PTT call remains
open for a short time. If no one presses PUSH TO TALK on the handset within
ten seconds, the PTT call ends automatically.
•
•
•
To Next Page
Loading...
Need help?
General
