AT&T CL81114 User Manual

62
Add a call block entry
Press MENU/SELECT in idle mode.
Press CID or DIR to scroll to Call block,
then press MENU/SELECT.
Press MENU/SELECT to choose Block list.
Press CID or DIR to scroll to Add new entry,
then press MENU/SELECT.
When the screen displays Enter number, use
the dialing keys to enter a telephone number
(up to 30 digits).
Press
CID or DIR to move the cursor to the
left or right.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase
all digits.
Press and hold
REDIAL/PAUSE to enter a
three-second dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/
PAUSE. Then, press CID or DIR or
REDIAL/PAUSE repeatedly to find the desired number. Press
MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
The display shows Number repeated if the number is already
in the call block list. You cannot save the same number twice.
7. When the screen displays Enter name, use the
dialing keys to enter a name (up to 15 charac-
ters). Each time you press a key, the character
on that key appears. Additional key presses pro-
duce other characters on that key. Press a key
repeatedly until the desired character appears.
1.
2.
3.
4.
5.
•
•
•
•
•
•
Call block
Review
>Add new entry
>Block list
Calls w/o num
Caller ID log
>Call block
ENTER NUMBER
888-883-2445_
ENTER NAME
Salesman_
Call block

AT&T CL81114 Specifications

General

Brand	AT&T
Model	CL81114
Category	Cordless Telephone
Language	English