23
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have
pulse (rotary) service, you must change the dial
mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
SELECT in idle mode to enter the
main menu.
2. Use
TCID or SDIR to scroll to Settings, then
press MENU/SELECT.
3. Use TCID or SDIR to scroll to Dial mode, then
press MENU/SELECT.
4. Use
TCID or SDIR to highlight Touch-tone or Pulse, then press
MENU/SELECT. There is a confirmation tone and the screenand the screen
returns to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Use
TCID or SDIR to scroll to Web address, then press
MENU/SELECT.
DIAL MODE
>Touch-tone
Home area code
>Dial mode
Handset settings
To Next Page
Loading...
