32
Multiple handset use
Handset locator
The handset locator feature is useful if you
misplace any handsets.
To start the paging tone:
Press
/HANDSET LOCATOR on the
telephone base to start the paging tone on all
handsets for 60 seconds.
NOTE: If you press OFF/CANCEL or MUTE/DELETE on a
handset, the ringer of that handset stops, but the paging
to the rest of the handsets continues.
To stop the paging tone:
Press PHONE/FLASH, /SPEAKERSPEAKER, or
any dialing key (0-9, TONE or #) on the
handset(s).
-OR-
Press
/HANDSET LOCATOR on the telephone base.
Join a call in progress
When a handset is already on a call and you would like to join the
call, press
PHONE/FLASH or /SPEAKERSPEAKER on your handset.
To end the call using a handset, press
OFF/CANCEL or place the
handset in the telephone base or charger. The call does not end
until all handsets hang up.
NOTE: You can use up to four system handsets at the same time on an
outside call.
•
•
•
Multiple handset use
**Paging**
To Next Page
Loading...
Need help?
General
