AT&T CL81114 User Manual

Telephone operation
31
Options while on call
To transfer an outside call directly without notifying the desired
handset:
1. During the call, press MENU/
SELECT.
2. Press
MENU/SELECT again to choose Transfer.
If you have a two-handset system and no
other registered devices, the outside call is put
on hold and your handset shows Transferring
call... The other handset rings and shows
Transfer from other handset.
If you have other registered device(s) or
more than two handsets, your screen shows
TRANSFER TO: Use the dialing keys to enterenter
a specific handset number (1-9 for handsets
1-9, TONE
followed by 0-2 for handsets 10-
12, or TONE followed by # for all handsets),
or press T
CID or SDIR to scroll to the desired
handset and press MENU/SELECT. The outsidehe outside
call is put on hold and your handset screen
shows Transferring call... or Transferring
call to all... The other handset rings and shows Transfer
from HANDSET X (HANDSET represents the handset name, X
represents the handset number).
3. To answer the call on the destination handset, press, press
PHONE/
FLASH, /SPEAKERSPEAKER, or any dialing key (or any dialing key (0-9, TONE or #). The The
initiating handset shows Call transferred and goes to
idle mode.
NOTES:
To cancel the transfer and return to the external call before the blind transfer call is
answered, press
OFF/CANCEL, PHONE/FLASH or /SPEAKER on your handset.
If the other device does not answer the transfer within 30 seconds, the transfer ends
and the initiating handset rings while showing No response to transfer. If it does not
pick up within 30 seconds, the handset returns to idle mode and the outside
call ends.
•
•
•
•
>Transfer
Intercom
TRANSFER TO:
>Handset 2
Phone 0:00:12
6:30
AM
8/06

AT&T CL81114 Specifications

General

Brand	AT&T
Model	CL81114
Category	Cordless Telephone
Language	English