Telephone operation
28
Volume control
You can set the listening volume to one of six
levels. While on a call, press TCID/VOLUME to
decrease or press TDIR/VOLUME to increase
the listening volume.
NOTES:
Handset and speakerphone volume settings are independent.
When the volume reaches the minimum or maximum setting, you hear two beeps.
Call waiting
If you subscribe to call waiting service from your telephone service
provider, and someone calls while you are already on a call, you
hear two beeps.
Press
PHONE/FLASH on the handset to put your current call
on hold and take the new call.
Press
PHONE/FLASH on your handset at any time to switch back
and forth between calls.
NOTE: Missed call waiting calls are not counted as missed calls.
Mute
Use the mute function to turn off the microphone.
You can hear the caller, but the caller cannot
hear you.
To mute a call:
While on a call, press MUTE/
DELETE. When
mute is on, the handset shows Muted for a few
seconds and MUTE icon displays until you turn
off mute.
•
•
•
•
•
Options while on call
Muted
MUTE
6:30
AM
8/06
Microphone ON
6:30
AM
8/06
To Next Page
Loading...
Need help?
General
